Logo ExperflowInstruments
Engeenired FLow Solutions
Products Services
About Us
AccuCone DP Meters - FC200 • Flanged - Wafer - Butt Weld
Performance Specifications
• For Water, Steam, and Gas flow measurements.
Pipe sizes from: 1/2”(13MM) to 24”(600MM)

• Integral Transmitter Mount 3 or 5 valve manifold
(IT3V-Option Sizes 1/2" to 2-1/2")

• Mass Flow Measurement with dynamic process
compensation for pressure, temperature and DP with
multivariable transmitter

• End connections:
- Threaded and Insert Types (up to 3"/75mm)
- Butt-weld and flanged (up to 2500psi/165 Bar)

• Wafer types are designed to be installed between
existing flanges (Series 300)

• Low pressure losses (High energy savings),
low pumping costs (1/2 of orifice plate)

• Very Short or Minimum straight pipe requirements
(2D Upstream/1D Downstream)

• Design Standards: ASME/MFC-3M, ISO-5167,
ANSI B31.1 and B31.3

• Materials: CS, 304 or 316SS, Chrome Moly,
and others: As required TBA

±0.75% Of Rate – uncalibrated
±0.5% Of Rate – calibrated
Better Accuracy can be achieved
(combined with DP transmitter ITV3 option)
±0.1% of rate (Over entire flow range)
Process Temperature:
Up to 2000°F (1100°C)
Pressure Rating:
Up to 3000psi (200Bar)
Minimum Reynolds Number:
>50,000 Rd
Maximumt Pressure Loss:
25 to 55% of DP (depends on pipe size and Beta ratio)
Turn Down Ratio (TDR):
10 to 1 (higher with stacked transmitters)
Discharge Coefficient:
Very stable - Dependent on Beta Ratio and pipe size
Maximum Viscosity:
Up to 500 CP (CentiPoise)

Pictures (click to enlarge)
AccuCone Drawing
AccuCone Drawing
AccuCone Flanged 150#
AccuCone Flanged 150#
AccuCone Section
AccuCone Section
Wafer AccuCone Calibration
Wafer AccuCone Calibration
AccuCone 3" 900# CS Body
AccuCone 3" 900# CS Body
AccuCone 4 " 600# SS Body
AccuCone 4 " 600# SS Body
CopyrightsHome :: Contact Us